Tested in a three-cat house Updated December 2025
Review • Cat hair resistant sheets

REST Evercool+ Sheets Review: A Year With Three Cats

Slick nylon weave, $220 MSRP, $170 on sale. Hair brushes off in 30 seconds and the bed looks clean every morning.

I bought REST Evercool+ Sheets a year ago after a decade of fighting cat hair on cotton-poly, and the bed looks clean every morning for the first time since I had cats. Slick nylon weave, hair brushes off, that's the whole pitch.

This is part of the bedding guide, broken out into a full review because the sheets are the single piece of the bed that did the most for cat hair in my house. The comforter solves half the problem, the sheets solve the other half. Replacing both at once is the upgrade.

Verdict 4.5 / 5 The best sheets I've owned for cat hair. A year in with 3 cats including 2 longhair rescues, no snags, no pilling, and the cool-touch is real. The price is the only honest gripe and it goes on sale for $170 often enough to not matter.
Herbie, an orange longhair cat, lounging on the smooth grey REST Evercool+ sheet set
Herbie on the sheets I bought to deal with hair from cats like Herbie. The bed is covered in fur every night and looks like this every morning.

The real fix

Why fabric is the problem, not the cleaning routine

I spent years buying better lint rollers and washing sheets twice a week. None of it worked because the fabric was the problem. Cotton-poly is a loose weave with polyester static, hair gets pulled toward the fabric and embedded into the gaps in the weave, and washing rearranges hair more than it removes it. I've pulled sheets out of the dryer still covered in fur.

Brushed microfiber is worse. That fuzzy hand-feel is a layer of lifted micro-fibers up close, every cat hair gets multiple anchor points to hook into, and the static makes it actively grab hair out of the air. If your pillowcases hold more hair than your sheets, that's why. Most pillowcases are sold as ultra-soft microfiber, which is the same fabric, just labeled to feel premium.

Slick nylon is the opposite category. Tight weave, low static, low friction. Hair lands and there's nothing for it to embed into, so a hand passes over and the hair lifts off. The fabric isn't doing anything fancy, it's just smooth enough that hair has nowhere to anchor. Same physics as why hair slides off a satin pillowcase. REST scaled it up to a full sheet set with stretch and deep pockets.

The honest bedding fix isn't a cleaning routine, it's a fabric swap. The bedding guide breaks down which fabrics actually let hair go and which ones quietly make the problem worse.

Up close

Cotton vs slick nylon, under a macro lens

Same problem under a macro lens. My old cotton-poly sheet on the left, REST Evercool+ on the right. Same lighting, same magnification.

Macro close-up of cotton-poly sheets showing loose fibers, lifted ends, and embedded cat hair fragments
Cotton-poly macro. Loose weave, lifted fiber ends, fragments of hair already embedded in the surface. Every one of those tiny ends is a place for cat hair to anchor.
Macro close-up of REST Evercool+ nylon sheet showing a tight, smooth, ribbed weave
REST Evercool+ macro. Tight ribbed weave, smooth surface, almost reflective. Hair has nothing to grab onto.

You don't need a macro lens to feel it. Run a finger across each. The cotton drags, the REST glides. Cat hair behaves the same way your finger does.

Real-use

Living with the sheets in a 3-cat house

My 3 cats are on the bed every night. Leo sleeps on the corner, Luna burrows under the duvet, Herbie is the orange longhair in the photo above and he sheds like a department store rug in summer. The bed gets covered in hair every single day. With my old cotton-poly sheets that meant a lint roller and 5 minutes before I could climb in. With these I run a hand across, the hair lifts off in a clump, into the trash, done in 30 seconds.

The fitted sheet is the part I underestimated. It's nylon-spandex with a wide elastic band and deep pockets, and it does not pop off when a cat sprints across the bed to a window. My old cotton-poly fitted sheet would unhook a corner once a week. This one hasn't moved in a year. It also stretches over a mattress with a topper without strain, which I needed because I added a 3 inch foam topper last summer.

Hair on the bed at night doesn't bother me anymore because hair on the bed in the morning isn't there. That's the whole upgrade in one sentence. The sheets aren't doing magic, the hair is still landing, it's just not staying. After a year I trust the fabric more than I trust any cleaning tool.

For the days when the hair has already gone everywhere else in the house, the surface-by-surface guide covers couches, clothes, carpet, the whole tour. Bedding is the easiest one to fix because the fabric does most of the work.

Sleep quality

Cool-touch, breathable, and one quirk

The cool-touch is real. REST quotes a Qmax rating of 0.36 for the Evercool fabric vs 0.11 for cotton, which is the kind of number that sounds like marketing copy until you climb in on a hot night. First contact with the sheet is noticeably cool. The fabric breathes, it doesn't trap heat the way cotton-poly does, and in summer that's the difference between sleeping through the night and kicking the comforter off at 3 a.m.

The slick feel takes a couple of nights. If you've slept on cotton your whole life, the first night on REST feels almost satin-like. By night three it's just normal, and going back to a hotel cotton sheet feels rough.

The one real quirk is slick on slick. If you pair these sheets with the matching REST Evercool comforter, the comforter slides on top of the sheets. Both surfaces are smooth, neither has friction, the comforter ends up on the floor by morning. Either get a duvet cover with some grip, accept you'll tug it back once a night, or pair the slick sheets with a cotton or sateen duvet cover instead. I went with the tug-back option and it's fine.

Honest gripes

Where they fall short

The price is the obvious one. $220 MSRP for a queen sheet set is premium territory, and a basic cotton-poly set is $30 at Target. The way I justify it is the cost-per-night math, a year in I've slept on these maybe 360 nights and the bed looks clean every morning. If I bought $30 sheets and replaced them three times in the same year because they pilled and grabbed hair, I'd be at $90 plus the lint rollers plus the washing. The premium fabric pays for itself if you're actually fighting cat hair every day.

The other gripe is the slick-on-slick comforter problem above. Not the sheet's fault, not the comforter's fault, just physics. If you only buy one piece of the REST line, get the sheets and pair them with a cotton or bamboo sateen duvet cover. That keeps the slick where it matters and the grip where it matters.

Color selection is limited. They sell mostly neutrals and a few muted tones. If you want bright patterns this is not the brand. The sheets are quiet by design.

Pros

  • Hair brushes off in 30 seconds, doesn't embed in the weave
  • Cool-touch is real (Qmax 0.36 vs 0.11 cotton)
  • Anti-snag, anti-pilling. A year of 3 cats and zero damage
  • Deep pockets, wide elastic band, fitted sheet stays put
  • Stretchy enough for thick mattresses with toppers
  • Often $170 on sale, off $220 MSRP

Cons

  • Premium price even on sale
  • Slips against the matching REST comforter, both surfaces are slick
  • Slick feel takes a few nights to get used to
  • Limited colors, mostly muted neutrals
  • No fabric softener, no high heat in the dryer

Frequently asked

FAQ

Do REST Evercool+ sheets actually repel cat hair?

They don't repel hair, hair still lands on them every night. The point is hair brushes off instead of embedding. A pass with a flat hand clears the bed in 30 seconds. My old cotton-poly sheets held hair through a full wash cycle. The slick nylon weave is the actual difference, not a coating that wears off.

REST Evercool+ vs bamboo sateen for cat hair, which is better?

REST is slicker and lets hair go faster. Bamboo sateen is half the price and still good, hair brushes off, just not as cleanly. If you want the absolute lowest hair retention and the cool-touch, REST. If you're sensitive to a slick feel or you want $50 sheets that beat microfiber, bamboo sateen is the smart compromise.

Are REST Evercool+ sheets worth $220?

If you're washing bedding twice a week because of cat hair, yes. I bought mine on sale at $170, off $220 MSRP. A year in they look new and the bed looks clean every morning. The cost-per-night math gets reasonable fast when you stop fighting the sheets you have.

How do you wash REST Evercool+ sheets?

Cold wash, low tumble dry. No fabric softener, no dryer sheets, no high heat. Softener leaves a film that kills the slick feel and the cool-touch. I run them weekly with the rest of the bedding and a FurZapper disc, they come out clean and the hair ends up in the lint trap instead of stuck to the fabric.

Do REST Evercool+ sheets work for hot sleepers?

Yes, this is the other thing they're built for. REST quotes a Qmax cool-touch rating of 0.36 vs 0.11 for cotton, which sounds like marketing copy until you climb in. The first contact with the sheet is noticeably cool, and they don't trap heat the way cotton-poly does. If you sleep hot in summer this matters as much as the hair part.

Are REST Evercool+ sheets durable with cat claws?

Mine are a year in and there's no snags or pulled threads. The fabric is anti-snag and anti-pilling, which I assumed was marketing until I had 3 cats climbing on the bed every night for a year. Two of mine are longhair rescues that sprint and brake on the sheet. No damage. A determined claw could probably catch the weave, but normal cat traffic doesn't.

REST Evercool+ vs percale, which is better for cat owners?

Percale wins on price and feel if you like crisp sheets. REST wins on hair retention and cool-touch. Percale is a tight 1:1 cotton weave so hair brushes off cleanly, just not as fast as the slick nylon. If you hate slippery sheets, get a 400 thread count percale. If you want the bed to look clean with the least effort, REST.

Can REST Evercool+ sheets snag on cat claws?

In a year of 3 cats, mine haven't. The weave is tight and the fabric is anti-snag by design. A direct claw drag at full extension might catch a thread, the same way it would on satin or sateen, but normal walking and kneading doesn't. Compared to my old cotton-poly that pilled and pulled, these have held up better.

Why do my pillowcases collect more cat hair than my sheets?

Almost always brushed microfiber. Pillowcases are the cheapest piece of the bed and they get bought as ultra-soft microfiber sets all the time. That brushed surface is a forest of tiny lifted fibers, and every cat hair hooks into one. Switch the pillowcases to nylon, satin, or bamboo sateen and the same cats put a fraction of the hair on them.

The sheets handle the bed. For furniture in the same fabric vein, the ChomChom roller review covers couches and chairs, where a static-charge roller pulls hair out of weave that brushing won't reach. And if you're rebuilding the whole bed at once, the REST Evercool comforter review is the matching top layer.

How I tested

The bar this thing had to clear

01

Bought at retail

Paid $170 for the queen set on sale, off $220 MSRP. No review unit, no REST freebie, no PR sample. The version of the purchase a real person makes.

02

Slept on for a year

Through a full year of 3 cats including 2 longhair rescues. Summer heat, winter cold, and weekly washes. Not a one-night impression, the actual long-haul.

03

Replaced what they replaced

The cotton-poly sheets I had before grabbed hair the entire wash cycle. These came out clean. Same cats, same washer, different fabric. That's the test.